Solid State Dimmers

$74.75$382.80

NamePriceStockBuy
Solid State Dimmers - Single Circuit, Dimmer Kit Only$74.75

In stock

Solid State Dimmers - Single Circuit, Dimmer With Pre Fab Harness$169.85

In stock

Solid State Dimmers - Two Circuit, Dimmer Kit Only$148.65

In stock

Solid State Dimmers - Two Circuit, Dimmer With Pre Fab Harness$239.95

In stock

Solid State Dimmers - Three Circuit, Dimmer Kit Only$257.95

In stock

Solid State Dimmers - Three Circuit, Dimmer With Pre Fab Harness$335.00

In stock

Solid State Dimmers - Four Circuit, Dimmer Kit Only$305.00

In stock

Solid State Dimmers - Four Circuit, Dimmer With Pre Fab Harness$382.80

In stock

NOTE: THE ABOVE DIMMERS DO NOT INCLUDE KNOBS. ORDER KNOBS BELOW IF NEEDED

NamePriceStockBuy
BLACK FLUTED DIMMER CONTROL KNOB$4.90

In stock

Clear

Economical solution for the dimming of aircraft interior lighting. These heavy-duty solid state dimmers by Superior Panel Technology includes all necessary potentiometers with built-in off switch and 115W power transistors mounted to a heat sink. The supplied colored Mil Spec wire and very easy to follow wiring diagram allows the aircraft builder to customize the wiring harness to fit individual needs. A solid state dimmer provides the most uniform dimming if you are dimming a combination of LEDs, incandescent bulbs and electroluminescent lamps on the same circuit (such as SPT’s Glow Strips, FiberLites, and LED glare shield light strip). They are rated for 2 amps per circuit, and the multi-circuit dimmers allow for two discrete power inputs (One for circuit one, and one for remaining circuits). Appropriate for both 14V and 28V systems.

The optional pre-fabricated wire harness will save you time. The wire harness is 34” length from the potentiometers to the connector that plugs into the heat sink. This will make installation and removal extremely easy. You simply connect the ground wire, the power input wires and a variable power output wire to each circuit.

Control knobs sold separately

Weight N/A
Dimensions N/A
Circuit Number

Single Circuit, Two Circuit, Three Circuit, Four Circuit

Wiring Harness

Dimmer Kit Only, Dimmer With Pre-Fab Harness

Documents

Youtube Video – Choosing the Correct Dimmer
www.youtube.com/watch?v=UgVHdJDl2FQ

Below are instructions for the Red Circuit Board Dimmers with the Pre-Fab Harness
Pre-Fab Harness Instructions for Single Circuit Dimmer

Pre-Fab Harness Instructions for 2 Circuit Dimmer

Pre-Fab Harness Instructions for 3 and 4 Circuit Dimmers
Below are instructions for the current Dimmer Kits (Red Circuit Board) without the Pre-Fab Harness
(If instructions are needed for the older Green Circuit Board units please contact us.)
Single Dimmer Installation Instructions REV 2019-02-05.pdf1
Multi Circuit Solid State Dimmer Instructions

Accessories

Enter the quantity desired of each item in the Buy column.

NamePriceStockBuy
BLACK FLUTED DIMMER CONTROL KNOB$4.90

In stock

Reviews

There are no reviews yet.

Be the first to review “Solid State Dimmers”

Your email address will not be published. Required fields are marked *

Questions and answers of the customers

SKU: LD115W Categories: ,